Rectangular Brush Grommet

Non-split Type

Split Type

Non-Split Type (Square)

Maintaining adequate underfloor static pressure is one of the most important aspects for successful cooling of the data center. The POWERFLOOR brush grommet is intended for new installations to seal floor cutouts before the installation of power or communication cables. “Bypass air” is conditioned air that does not reach the intake of IT equipment. The elimination or reduction of “bypass air” is essential to the successful operation of the cooling dynamics of the data center. Air-Brush is the economical choice in raised floor grommets.

  • Promotes Hot Aisle/Cold Aisle best practices
  • Increases overall room cooling capacity
  • Increases the underfloor static pressure
  • Improves airflow where it is needed
  • Can be used on new or existing Data Centre
  • Dimension: 280mm x 210mm x 42mm
  • Dimension: 175mm x 175mm x 38mm

round brush grommet

Round Brush Gromment
round brush grommet split

Round Brush Grommet

  • The Round Grommet allows for large cable bundles to be pulled through the usable area.
  • The split feature of the round grommet allows product installation or removal without disturbing cables.
  • The Grommets contain no loose or partially fastened parts, which can become separated or fall through the raised floor.
  • The Grommets are impact resistant and durable.
  • Made of durable ABS thermoplastic.
  • Face size: 145mm, Cut out: size 100mm, Height: 50mm

koldlok

KoldLok SplitLok Integral Grommet – Model #4040

  • Split Frame
  • Interlocking feature fastens the two halves together
  • Dry erase markable surface (non-permanent marker)
  • New and improved finish quality
  • Stronger material – high-impact ABS plastic
  • Easier installation
  • Smooth polished surface
  • Dimension: 279mm x 212mm x 42mm

KoldLok SplitLok Square Grommet – Model #5050

Square grommet for new or existing floor tiles.

  • Split Frame
  • Square Design
  • Interlocking feature fastens the two halves together
  • Dry erase markable surface (non-permanent marker)
  • New and improved finish quality
  • Stronger material – high-impact ABS plastic
  • Easier installation
  • Smooth polished surface
  • Dimensions:190.5mm x 187.71mm x 41.66mm

KoldLok Mini – Model #10077

Designed to seal small openings in new or existing raised floor cutouts either prior to the installation of communications or power cabling or where cabling has already been installed.

Based on measurements at multiple data centers, on average 48% of valuable conditioned air is not reaching the air intake of IT equipment due to unsealed floor openings.

This lost air, known as bypass airflow, contributes to IT equipment hot spots, cooling unit inefficiencies, and increasing infrastructure costs. KoldLok® products specifically address bypass airflow and its detrimental effects on data center cooling.

Dimension: 195mm x 145mm x 38mm